# Single Piece Setup

### Manufacturing model

* First change workspace to the "Manufacturing" workspace. Click the "Design" workspace and choose "Manufacture".

<figure><img src="https://2672570991-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F1eJjdzhp2Cs7gB9IeGjr%2Fuploads%2FhtVJGdvPcOFvBm2pyPYJ%2FSk%C3%A6rmbillede%20(2).png?alt=media&#x26;token=2fd7531d-a238-4a8e-b35e-ac50f64480de" alt="" width="563"><figcaption></figcaption></figure>

* Then click "Setup".

<figure><img src="https://2672570991-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F1eJjdzhp2Cs7gB9IeGjr%2Fuploads%2FfD5HRnUBkURl1K6CQg3C%2FSk%C3%A6rmbillede%20(1).png?alt=media&#x26;token=1f5c3e41-fce1-460a-82db-9970c6aedead" alt="" width="563"><figcaption></figcaption></figure>

* Then press "Model" and select the components you are working with.&#x20;

<figure><img src="https://2672570991-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F1eJjdzhp2Cs7gB9IeGjr%2Fuploads%2F9h3OjzvE9frXuH0Oa6NV%2F2.png?alt=media&#x26;token=33b60e88-902c-469c-b8d0-c220d059e5e6" alt="" width="563"><figcaption></figcaption></figure>

* In the top of the setup panel, click "Stock," then choose "Add stock to all sides" and enter the extra material you have on each side — typically 20 mm to each side as a minimum. This extra stock material will allow for space to screw or nail the stock material in place. In this case there is an extra 30 mm to each side. \
  Set both the stock +/- Z to 0. \
  The dimensions in "Stock Dimensions" should now match your piece of stock material.

<figure><img src="https://2672570991-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F1eJjdzhp2Cs7gB9IeGjr%2Fuploads%2FvYPTPlOqgrzdBJy8gabq%2FSk%C3%A6rmbillede%20(7).png?alt=media&#x26;token=b6b34f5b-623c-4691-8fcc-504d812d4f39" alt=""><figcaption></figcaption></figure>

* Set the stock point (zero-point) by clicking on "Setup" and selecting "Box Point."

<figure><img src="https://2672570991-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F1eJjdzhp2Cs7gB9IeGjr%2Fuploads%2FtKpsnkQeGdgf05g5ewOD%2F3.png?alt=media&#x26;token=2ce206f2-c8ca-411a-ad86-d59b7ae9baa9" alt="" width="563"><figcaption></figcaption></figure>

* The zero point should be in the bottom of the far corner. The longest side should be oriented along the x-axis. Rotate your component in the Design workspace if you want to orient the component in another orientation.

<figure><img src="https://2672570991-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F1eJjdzhp2Cs7gB9IeGjr%2Fuploads%2FrsNkaSv3dsBrXQrpereY%2FSk%C3%A6rmbillede%20(11).png?alt=media&#x26;token=b560aac0-a60c-4946-b202-8d08553bd772" alt="" width="563"><figcaption></figcaption></figure>

## Tool paths

Now we are ready to define the toolpaths of your project. Click the link below to continue the guide.

{% content-ref url="tool-paths" %}
[tool-paths](https://kadk-3d.gitbook.io/digital.manufacturing/cnc-routing/tool-paths)
{% endcontent-ref %}
